| How to maintain water park equipment |
| DATE：2022/5/30 【 Font Size：L M s 】【PRINT】 Page view:3869 |
Water park equipment is an important part of water park and a source of happiness for tourists. However, the safety and normal use of the water park equipment is an important condition for the operation of the water park, so maintenance personnel are required to regularly maintain the water park equipment to ensure that tourists have fun and rest assured. Here are some general knowledge about the maintenance of water park equipment.
1. The water slide needs regular inspection
Some slides that are relatively gentle and can be moved by workers on the water slides require workers to check these water slides every day before using the equipment. Especially when inspecting and maintaining the slide, the staff should also take safe and effective measures to inspect the whole water slide, and it is better to make inspection and maintenance records.
2. Maintenance and cleaning of water slide
During the inspection, it is found that there are dirty places on the surface of the water slide. It is necessary to clean the water slide with a soft brush and a relatively neutral detergent. It is also necessary to remove the dust, grease, sunscreen and other pollutants on the surface of the water slide. For the pollutants that cannot be cleaned, the water slide can be polished and then repaired with polish and paint wax. Generally, before painting wax, the workers need to use a better polishing agent to polish the stains and some places on the water slide where the color has faded to the initial gloss. Special attention should be paid to the use of polishing and other tools. Be very careful not to make the surface of the water slide too hot, because if it is too hot, it will not only cause fine sand like particles on the surface of the water slide, but also easily cause blisters and stripes on the water slide, so it needs to be repainted.
3. Inspection and maintenance of pump house water pump and power distribution cabinet: check whether the lubricating oil of the pump reaches the indication line (or add grease through the grease nipple) before startup. If not, add enough as required; Check whether the foundation bolts of each pump and the connecting bolts of the pipe flange are loose. If they are loose, retighten them. In addition, check the electrical components of the electromechanical distribution cabinet to check the insulation. If it meets the requirements, the power can be connected to start the water pump and the water supply slide can supply water.
4. Inspection and maintenance of the water slide support components and the departure platform: before starting, check the connecting bolts of the water slide support components and the departure platform components to see if they are loose or fall off. If they are loose, retighten them. Check the important welding to see if there are cracks. If there are cracks, repair welding shall be carried out. In addition, all components with anti-corrosion paint falling off shall be repainted with the same color paint.
|
